ZCH154-02-13-002_Product info_train parts|subway parts|railway parts|railway castings-Contact--CRRC China

ZCH154-02-13-002

2021-09-08 15:45 Click：times

Roll sleeve	Turn K2
Roll sleeve	Turn K5
Extend the roll sleeve	K5 136×26×16
Roll sleeve	22×12.5×168
Lift roller sleeve (oily nylon)	ZCH154-02-13-002
Cross the beam nylon pad	Turn K2
Minding pad pad across beam	Turn K4
Parallel grinding plate	Turn to the new JC type of type K2
Slider abrasive sleeve	100 × 53 × 48 GGM
Composition of the elastic side carrier	Type JC-3
Elastic parasymptote	Type JC-1 turns at 8B, for 8AB
Parallel grinding plate	JC-1
Support abrasive plate	JC-1
Heartdisc abrasive disk	Turn to the 8G conductive type
Heartdisc abrasive disk	Transfer K4 conductive type
Heartdisc abrasive disk	Transfer K5 conductive type
Support board	Turn K5
Composition of the elastic side carrier	K4、K5
Parallel grinding plate	Turn K4 circular band platform
Combination dust collector	Dg25
Carry saddle	Turn K6
Carry saddle	Turn K2
Side frame column grinding plate	Turn K6
Side frame column grinding plate	Turn K2
Flat hole round pin	20×65
Flat hole round pin	20×68
Flat hole round pin	28×50
Flat hole round pin	28×58
Flat hole round pin	28×62
Flat hole round pin	28×65
Flat hole round pin	28×95
Flat hole round pin	28×115
Flat hole round pin	32×65
Flat hole round pin	32×68
Flat hole round pin	36×60
Flat hole round pin	36×62
Flat hole round pin	36×65
Flat hole round pin	36×68
Flat hole round pin	36×75
Car hook	13B
Car hook	16
Lower lock pin shaft	16
Hook tongue pin	17
Lower lock pin composition	16
The hook lock iron comprises	16 N. E. 17
The hook tongue pushes the iron	16 N. E. 17
It is composed across beams	Turn K6
It is composed across beams	Turn K4
It is composed across beams	Turn K5
Cross the beam seat	Turn K2
Across Leung Toto	Turn K6

TAG：