Type KZW-4GCD
2021-09-08 15:53 Click£ºtimes
| Adjust the composition of the valve rubber parts | T-1 |
| Composition of sensing valve | Type KZW-4GCD |
| The adjustment valve forms the rubber parts | KZW-4GAB |
| Composition of sensing valve | C-21¡¢C-27 |
| Broken Angle plug door rubber parts | A core corner plug door |
| Angangle plug door press circle | 50×43×20.5 |
| Deail automatic valve stainless steel ball valve rubber | Off-track automatic valve |
| Combination of dust collector rubber parts | 66×4 |
| Lock the board | Turn K2 |
| Pressure-limiting valve anti-theft device | L=68 |
| Dust blocking and chain | GM |
| Anti-jump plug-in | 17 |
| Signs board | Turn from 8AG, to 8G, to K2 |
| Double ear gasket | Turn K2 |
| Composition of hook bolt protective plate | 13B |
| Switch pin | TB33-74 Q235 various vans |
| Flexible brake tile plug-in-pin ring | ECP310-00-000 |
| Combined dust collector box | Dg25 |
| Hook wrist pad | 54×42×6 |
| Horseshoe ring | 16*90 |
| Horseshoe ring | 16*55 |
| Horseshoe ring | 16*75 |
| Soft tube chain | 70T |
| Side door limit gear | A 2-bit QCH235-30-03-000 |
| Exterior tongue stop gasket | Type KZW type Φ35 |
| Hand brake lightning hammer | Type A |
| Hand brake hand wheel (large) | C62A |
| My best son | Folding hand gate |
| Brake cylinder push rod | 29×610 (B |
| Brake cylinder push rod | C70H 29×610 |
| High foot door lock | Shack |
| Low foot door lock | Shack |
| Brake beam safety chain ring head | L-B |
| The inner and outer filaments are bent | Dg15 |
| The inner and outer filaments are bent | Dg20 |
| The inner and outer filaments are bent | Dg25 |
| The inner and outer filaments are bent | Dg32 |
| Internal and external wire active bend | Dg15 |
| Internal and external wire active bend | Dg20 |
| Internal and external wire active bend | Dg25 |
| Internal and external wire active bend | Dg32 |
| Live connector | Dg10 |
| Live connector | Dg15 |
| Live connector | Dg20 |
| Live connector | Dg25 |
| Live connector | Dg32 |
| Cross the beam pad | 2×50×90 |
| Cross the beam pad | 4×50×90 |
| Cross the beam pad | 6×50×90 |
| Cross the beam pad | 8×95×175 |
| Cross the beam pad | 10×90×150 |
TAG£º
- ÉÏһƪ£º11L belt seat
- ÏÂһƪ£ºQCH235C-82-02-000