NPT69-00-12B
2021-10-11 17:10 Click£ºtimes
| Sand pipe | 32×470 |
| The base is planted | M22×108×2 |
| Locate pin | 13×20 (two) DLC8-11-07 |
| Cover wheel | 80×79 DLC8-13-43 |
| Body washer | 60×37×8 DLC8-11-03B-1 |
| Flat key | 14×9×40 |
| Anti-loose pad | QSC7-26-00-008 |
| Bolt | M48×1.5×118 DLC8-41-20 |
| Total pipe bolts | M16×115 |
| Fuel pipe assembly | DLC8-81-10 |
| Support plate | NPT69-00-02B |
| Connector body | ¢ò ADg3 |
| Supercharger base screws | L=120 QSC7-33B-00-024 |
| Bolt | QSC7-62-00-006 |
| Locate screws | 10×32 |
| Bolt | M18×2.5×70 |
| Supercharger filings | M10-2×91 |
| The hexagonal nut | Motor boom bar 42 × 3 |
| Carboe | 60mm |
| The nut | M24×2 |
| Bolt | 14 × 55 with eyes |
| Locate pin | EQZ3-20-01-102 |
| Motor hanging rod bolt | M24×60 |
| Lock plate bar | 6×80 |
| Empty filter indicator | BD-PJ-14 |
| Intake catheter | K07h1000 |
| Coils | 80×29×14 DLC8-17-07B |
| Locate pin | (one) DLC8-11-04B |
| Handwheel | 80×65 DLC8-13-15 |
| Stop the gasket | Φ=1 (three) DLC8-32-23-1 |
| Stop the gasket | Φ=1 (four) DLC8-32-28 |
| Clap | 28×5 NPT24-02-04 |
| Pump shaft | TC621018-87 |
| Flower nut | M10×1.5 |
| Oil inlet pipe joint | M18×M20×296 NPT23-00-11B |
| Oil inlet pipe joint | NPT69-00-12B |
| Oil inlet pipe joint | NPT37-00-009-Q |
| Controller door lock | EQJ4-80-14-600 |
| Electrical cabinet door lock | MS-830 |
| Door lock | MS828 |
| Electrical cabinet door lock | MS710 |
| Protection cap | NPT23-00-09B |
| Plant silk | 14×1.5×15-12×1.5×35 |
| Plant silk | M14×2×68 |
| Plant silk | 10×50×1.5 |
| Column pin | 18×85 NPT5-30-16 |
| Hollow bolts | 18×1.5×52 |
| Valve | 20×14×34 DLC8-81-62B |
| Plant silk | 12×50×1.75 |
| Bolt | M10×1.5×50 |
TAG£º
- ÉÏһƪ£ºEQZ3-20-02-003
- ÏÂһƪ£º130SZ 05F26