QYS.K-4A-000
2021-10-28 11:17 Click：times
| Brake disc opening pin | QYS.K-4A-000 |
| Key | QYS.K-4-007 |
| Composition of the brake disc fasteners | M16 |
| Composition of the half-disk connection bolts | M24 |
| gate lock | 24-1 Left |
| gate lock | 24-1 Right |
| gate lock | 24-6 Left |
| gate lock | 24-6 Right |
| swing hanger cross beam | 207G |
| guide pin | 207G International Car |
| Traction lever assembly | 207G 211B |
| Brake beam composition | 207G straight |
| Brake beam composition | 207G Bend |
| Brake beam composition | 207G1 straight |
| Brake beam composition | The 207G1 bend |
| Brake pull rod | 207G |
| Brake lever pull board | 207G1 quadripuntal |
| Brake lever pull board | 207G1 Three-hole |
| Rocpillow lateral buffer | 207G1 |
| Medium hole round pin iron pad | (207G1)40×58×6 |
| Lower hole round pin iron pad | (207G1)32×50×4 |
| Lower hole round pin iron pad | (207G1)25×40×2 |
| Flat hole round pin iron pad | (207G1)32×50×4 |
| Flat open pin at shaft end of brake beam | (207G1)A6×21×75 |
| bed down the livestock | (207G1)56×80×4 |
| Nylon gasket | (207G1)44×72×6 |
| Iron pad | (207G1)220.5×105×3 |
| Gate wator adjustment screw | 207G1 |
| The brake wator crosses the bolt | 207G1 |
| Spring pillar flat pin | 207G1 |
| Shake the pillow and revoke the washer | (207G1)60×80×5 |
| Gavato composition | broad gauge 207G |
| The sluice tower is composed of hanging | Wide rail 207G right |
| The sluice tower is composed of hanging | Wide rail at 207G left |
| Gavato hanging round pin | 207G 32×120 |
| Gate watto lifting round pin rubber pad | 207G 33mm |
| Gate watto adjustment rod spring and cover | 207G |
| Steel liner | 207G 25×35×25 |
| Steel liner | 207G 40×50×25 |
| Steel liner | 207G 32×42×25 |
| Locate set | 207G 84×97×80 |
| Gate wator adjustment screw | 207G |
| Steel liner | 207G 40×50×15 |
| cushion | 207G |
| Pull plate lifting upper and lower hole adjustment pad | 25×35×2(207G1) |
| Double ten thousand axial axis | 207G |
| Gate wator to adjust the spring gasket | 207G 35×18×6 |
| Axial drive belt | 211B XPB2500 |
| Brake beam friction sleeve | The 211B International Car |
| Gavato adjustment rod | 211B |
TAG：