MS73010P-12303
2021-10-28 14:16 Click：times
| antislip strip | 918mm 201761 |
| Air heavy load valve mounting cushion | 124×149 |
| Outline rubber sleeve | 19×24×6 |
| Axial diameter protection cover | Φ135×300 HT71-822-5 |
| Tower dust cover | 75×41×225 |
| round nut | ZD1-000-010 |
| Seat back adjustment screws | TZY1.03-02 |
| Air gauge dust cover | 20×20 |
| Double-layer tube card | WDF-SC-10-12 WDF-SC-10-12 |
| Oil pressure damper iron cushion | 92×32×2 |
| Oil pressure shock absorber gasket | Φ84×Φ38×2 |
| T U | M10×60 |
| Double head screw | M16×60 |
| Type T bolts | M10×50 |
| Type T bolts | M10×85 |
| Type T bolts | M12×50 |
| Type T bolts | 16×70 |
| Rubber pipe card | 177 |
| dust cover | 15×45 |
| Brake cylinder ruler card | 356×254 |
| Crankcase perforatal rubber pad | KMS |
| Decor block | Φ35×Φ28×20 |
| Decor block | Φ25 |
| Bags | 20×20×17 |
| Bags | 301719 Foreign party and internal party |
| Bags | Φ15×Φ12×18 |
| Hydraulic closed door | 1934366 Install eye length 17919 with support |
| floor spring | NH-233 |
| Hand brake gear housing composition | PXL22-08-02-00 |
| Cover nut | M8 |
| Hook tongue pin nut | M30 |
| Twist adhesive pad | 55×33×21 |
| Twist adhesive pad | 90×32×25 |
| Hand gate pin | TXJ4-68-00-009 |
| Wheel lifting | SW-160 |
| Anti-pine lifting seat | 209HS Ccast PCKZ33B-20-00-003 |
| Hand brake lever | M36 |
| Shake pillow hanging rod | 209HS |
| clamp ring | 75×45×47 |
| The next side is composed of | 206G includes side box and slider |
| Joint rod coil | 25K |
| Position the rotating arm to position the axle retaining rim | PW-220K |
| Traction pull rod steel sleeve | 209 |
| Shake pillow hanging sleeve | 758550 209 Straight |
| Shake pillow hanging arc sleeve | 70×80×48mm |
| Hand brake cover | 25T |
| End tooth shaft | MS73010P-12303 |
| Two-hole gasket | 50×18×4 |
| Rubber windshield | Up to type 25 |
| Rubber windshield | Right type 25 |
TAG：
- 上一篇：NH-1233
- 下一篇：KT147-00-91