03ZA010007
2021-12-15 17:29 Click£ºtimes
| bolt | M12×130 DLJ6-02-06-018 |
| hand wheel | 80×28×25 HT20-40 DLJ6-02-06-500-1 |
| melt | M30×154 Q235A DLJ6-02-06-005 |
| platen | 138×60×18 HT20-40 DLJ6-02-06-203 |
| Oil collector spring | 52.5×37.5×2.5 |
| clip | 406300 Steel DLJ6-01-04-502B |
| Top shutter blades | (2) Short DLJ6-03-01-210 |
| Side blinds | Long (I) DLJ6-01-13-110-1 |
| Side blinds | Short (II) DLJ6-01-13-220-1 |
| Composition of the mechanical room door lock | Hand-buckle type SFJ12-75-17-200 |
| cover | 1Cr18Ni9Ti DLJ6-00-01-301-1 |
| clip | DLJ6-00-01-420-1 |
| Oil standard assembly | NT31-131 |
| Air valve cushion | 140801.5 One-piece T3 Copper NPT5-00-12 |
| side cap | NPT5-40-29 |
| Oil standard body | NPT5 |
| pin | Steel # 1885 45 NPT5-30-16 |
| Flow saving gas blocking | G3/8 ZTL3-103-048-7 |
| pin roll | 03ZA010007 |
| nut | 32×24×2 |
| nut | 63×60×25 |
| Carrying silk | M20×2.5×260 42CrMo |
| nut | 20×1.5 TB777-93 |
| steel bushing | 65×35×160 |
| Waste gas support pipe pad | 168×105×2 |
| Cylinder exhaust pipe pad | 168×105×2 |
| High pressure oil pump filings | M14×1.5×90 |
| Hollow bolt | 24×2×80 |
| bolt | 16×1.5×65 |
| bolt | 24×2×80 |
| Exhaust pipe bolt | M12×1.25×65 |
| thin nut | M30×1.5×8 |
| clamp nut | M36×3 iron |
| Exhaust pipe bolt | M12×1.25×25 |
| bed down the livestock | Φ60×Φ41×5 |
| hex bolts | 12×1.75×55 |
| Exhaust pipe bolt | M12×1.25×30 |
| Purple copper mat | 14×8×2 |
| bolt stud | M121.524 CY4VD21-solid-1612 |
| clamp nut | M24 |
TAG£º
- ÉÏһƪ£ºSFK1-01-40-04
- ÏÂһƪ£º¦µ32¡Á¦µ18¡Á2